Quantcast
Channel: High Availability (Clustering) forum
Browsing all 3614 articles
Browse latest View live

Cluster Network Unavailable on one node

Hi,We have 5 node cluster. Eache node have 4 NICs. NIC 1 nad 4 are teamed and presented to HyperV , NIC 2 is for CSV and is in separate VLAN  and NIC 3 is for Live Migrate and is also in separate VLAN...

View Article


Three node sql cluster across 2 sites

I would like to create a 3 node sql cluster. One active and One passive on one site and a passive located on another site. The 2nd passive server will be on a different subnet and heartbeat will also...

View Article


2008R2 cluster to 2012 cluster

I asked this in the migration forum, but they pointed me to you.I have read through the guide to migrate from 2003 or 2008 to 2008R2. I assume the same applies for 2008r2 to...

View Article

2008 R2 CSV Acting like Redirected Access but not in Redirected Access Mode

We've been experiencing some issues with some of our hyper-v guests lately with disk latency.  On one of our busy clusters a VM could have an average read or write latency of up to 300-400ms with...

View Article

Server 2012 Enterprise Cluster Crashing

I have a two node Failover clustered DL380 G7 server setup (vs1 and vs2) with a p2000 between them to hold all the files. The problem we are having is that the vs2 will somewhat randomly (1 week ~1...

View Article


Windows Storage Server 2008 R2 cluster network issue

Hello everybody,I've a Network Attached Storage HP X5520 G2 with Windows Storage 2008 R2 and five clustered file servers with several issues; everydays, at 6.00 AM and 12.00 PM, there're many Network...

View Article

CSVs assigned to the Cluster Aware Update DNN

Dear all,I have noticed that in our cluster our two CSVs are "assigned" to the cluster aware update' Distributed Network Name, i.e., browsing to Server Manager\File and Storage Services\Volumes the...

View Article

"Consider adding additional networks or network interfaces to the cluster"...

Dear all,I would like to submit to your attention a warning that I can't fix in our two-node Windows Server 2012 Failover cluster :We have 6 "NICs" per node: - 2 NICs for iSCSI (PT0/1; 10.0.0.x and...

View Article


Adding a printer to a cluster

I have just added print services to a cluster but I am having issues adding the printer. I connect to the cluster as\\clustername. I select View remote printers then Add a printer but I am getting...

View Article


Domain controller able to communicate with the member servers ,but member...

I try to establish failover clustering ,they said that two member servers not able to communicate with each other..when i tried to ping ,i was not able to establish successfull ping..please help me...

View Article

cluster nodes deleted from AD

Recently we were applying Windows Updates to the nodes in our cluster. When we attempted to move an instance of SQL back to an updated node it failed. I found & fixed a problem with the domain...

View Article

Validating File and Print Sharing network binding error

Hello,Hopefully somebody can assist me.Problem:  I am trying to create a 2 node failover cluster using starwind and Windows Server 2012.  While conducting validation I get a failure in the storage...

View Article

Hardware for Clustering

Hi All,Would like to look at clustering and have a couple questions to clear up.We have currently;2x HP DL380 G5 Server2x HP DL380 G4 ServerWe would like to run 3-4 virtual machines using Hyper-V on...

View Article


2003 cluster: add node wizard reports wrong IP info

Hello all,I am trying to add a 4th node to a 2003 cluster.  When I run the add node wizard the summary shows the public and private IP addresses for an existing node in the cluster (the one that is...

View Article

Is NetShareAdd still valid for Windows Server 2012 within a Failover Cluster?

We are trying to use NetShareAdd to create a share on the system and have it recognized in the clustered resource.  So the clustered resource name is "ExileOnMainSt" and thus:SHARE_INFO_503 si503 = { 0...

View Article


Host in 2008 R2 NLB Cluster randomly switches to "Converging" state

I have two SharePoint 2010 WFE servers setup in a NLB Cluster in multicast mode.  The servers are 2008 R2 running in a VMWare environment and both servers have only 1 NIC.  Several times per week one...

View Article

Failovercluster BSOD

We just got our second BSOD on a failovercluster box in 2 weeks. The setup is 3 server 2012 boxes (dell r610) with a 10 gig nic for san and the onboard for the public.the minidump shows netft.sys as...

View Article


HDisk for clustering

How can I make my HDisk1 on each node acceptable for clustering?  I created a cluster  with 2 nodes, each has 2 Hdisks Hdisk0, Hdisk1.  HDisk0 is the boot disk with the OS and all data.I want to use...

View Article

Can't access NLB cluster file share by name

I setup a NLB cluster which contains 2 servers. Both of them have a file share to share static files. I can access the file share on each node by using node's name or IP. However when I tried to access...

View Article

Node of 2008 R2 cluster fails join its cluster and causes bogus share witness...

Hello.I’m  trying to get   cluster 2008 R2 Ent. running as part of exchange server with two nodes DAG and witness server.  The cluster constantly gets one node down at random intervals (30 Min to 1-2...

View Article
Browsing all 3614 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>